we don't just imagine things, we make them!
TCS-WORLD help on line
red line
English SUPPORT Order Form TCS HOME


This page contains most important informations to enable you to use your TCS-WORLD.
Basically you need to:
  • 1- insert a SIM that does not ask for a PIN code (to remove this request you should insert it in a phone and select this feature).
    Once you have succesfully switched on your TCS-WORLD you may program a PIN into it using the #PIN command and then you can insert a SIM with that PIN you have programmed.
    If you want to start immediately with a SIM that has the PIN request enabled, don't insert a SIM, connect the TCS-WORLD to a computer and enter the program menu as explained in the TCS COMMANDS page.
  • 2- You can connect to the DC input any DC voltage from 12 to 35V.
    In order to charge a Lead battery properly you must apply at least 15VDC.
    You can connect to the AC inputs any voltage from 12VAC to 24VAC.
  • 3- a TCS-World PRO is able to work with a Solar Panel and recharge a battery.


    • Operation:

    When the TCS-World switches on:
  • The RED LED will flash indicating CPU activity
  • The green LED will flash indicating GSM activity


    • TCS-WORLD SMS Commands The TCS-WORLD has some SMS commands that are used to program telephone numbers, set clock etc. some of them are similar to the TCS 3.5 commands with some limitations
    If you are not familiar with our TCS boards here are some explanations:
  • Commands to the TCS-WORLD must be sent via SMS
  • You can group commands together
  • Every command must start with # and must be in CAPITAL LETTERS
  • the #INI command ERASES any previous setting so be careful when issuing it.
    A common mistake is to send a #INI at the end, after other commands. This will erase previous commands.
  • a command SMS must always start with #PWD followed by a 6 digits alphanumeric password (default is 123456)
  • The TCS-WORLD is shipped with both Admin and User password set at 123456, use #CAP and #CUP commands if you want to change them.
  • The TCS-WORLD will answer to your commands with an SMS (unless you put the #NOA command at the end of the command SMS), but in order to be able to answer, it needs a valid SMS center number that you should ask to your operator.
  • A common first command to send to your TCS-WORLD is #PWD123456#SCAyour_operator_sms_number#SCT
    The above command will setup the SMS center number that you will write in place of your_operator_sms_number and will synchronize TCS-WORLD clock with your operator clock.


    • For a list of available commands please check the TCS COMMAND LIST ON LINE and pay attention to the TCS-WORLD specific commands that are listed separately


    This is a temporary information and will be updated soon.
    In the mean time for any further information please use the link at the bottom of this page to contact us.

    red line
    English Chinese SUPPORT . Prices . BUY . TCS HOME


    Full production
    No minimum quantity required. You can order on-line
    • TCS EasyGate: Enables you to open your gate with your mobile phone
    • TCS-AWS: GSM autonomous weather station
    • TCS Micro: Low cost easy to use GSM remote control
    • TCS 3.5: Professional GSM remote control board with 8 digital I/O, analog inputs etc.
    • TCS-BOX Professional ready-to-use box and accessories for TCS 3.5
    • TCS RB8 8 relay board


    Special orders
    Minimum quantity required. Contact us before ordering
    • TCS-CAM II GSM/GPRS JPEG digital camera
    • TCS-GPS professional GSM+GPS tracking and Alert solution
    • TCS-METER: GSM/GPRS battery operated meter/data logger
    • TCS-Printer SMS printer with thermal paper 10 cm wide
    • TCS-WORLD:TRI-BAND GSM remote control (2 inputs 8 outputs)
    • TCS-LC II GSM remote control with on-board display,vending machine interface and transparent serial interface
    • TCS-LP: Low power solution. Monitors Liquid levels and inputs for over 1 year with standard alkaline batteries
    • MFP58: Flash Programmer to update TCS-Products firmware
    • X4 analog expansion board for TCS 3.5


    TCS Products SUPPORT

    TCS News
    Applications

    GSM Autonomous Weather station
  • GSM autonomous weather stations
    • Telemetry
  • Temperature monitoring
  • 4-20 ma or 1-5V sensor monitoring
    • Telematics
  • Track Vehicles with GPS and GSM
  • Fleet management Flash Animation
    • Home automation
  • Home automation with TCS
  • Example of Home Automation Flash Animation
    • Security
  • TCS-CAM II: GSM digital camera by DPS-Promatic
  • Grandma alarm
  • Open your gate with a free call
  • Access Control Flash Animation
    • Vending machines
  • Vending Machines remote management
  • Mobile Payment solutions
    • Links
  • Miscellaneous TCS products and applications links
  • www.dps-promatic.com web site
  • www.bodyweight.net Body Weight scales web site
    		•  
    tcs_WORLD picture 1
    1- Push the small button to eject the SIM holder
    2- Remove the PIN code from your SIM (use a telephone to do it and check it does not ask for the PIN when you switch the telephone ON).
    With the unit switched OFF, insert the SIM into the SIM holder and insert it back into its place until it locks.

    tcs_WORLD picture 2
    3- Connect antenna as shown above. Be careful when extracting it not to damage the small antenna connector in the GSM module. You must extract it without bending the connector.

     
    made in italy with love by dps-promatic
     ©2001 DPS-Promatic srl
     (Copyright & privacy)
     Last modified:2008/03/11:19:48:48         		DPS-Promatic srl - via Edison 21, 47100 Forlì, Italy 
    P.I. 01519970402 Fax+39-0543-725274
    Contact us... 
    468