|
|
|
Designed for locations where it is not possible to have power, this solution
based on a modified TCS 3.5, or on a TCS-WORLD in case 3 band GSM is needed, allows monitoring of inputs and analog input
with power coming from a set of standard alkaline batteries (8 batteries for 12V in total).
To save power, the unit is always in stand by mode. It wakes up every day at a certain
hour and sends an SMS with current I/O status.
In the picture above the solution has been implemented to monitor fuel tanks and report about their status
everyday. In this configuration the unit can run stand alone for over 1 year (up to 2 years in normal
temperature conditions).
The sensor shown in the picture is manufactured by GEMS sensors.
For more information contact us using the link at the bottom of the page, and refer to TCS LP.
|
|