TCS-GPS help on line: basic information

English SUPPORT Order Form TCS HOME

TCS-GPS help on line Basic description Block diagram and PCB description Sim card issues Switching on SMS commands Basic Functions Advanced Functions Registers description Data connection examples Specifications of LOGGED data record How to use the TCS-GPS with the GPRS option TCS OS command list   To switch on the TCS-GPS, you need only to apply power, by means of connecting the unit to a DC voltage ranging from 6 to 28 V. Operation: When the TCS-GPS switches on: the RED LED will flash every second indicating CPU operation The green LED will start flashing fast while it is trying to register to the network and then will stay ON, indicating GSM correct operation. The GPS yellow led will stay on as long as the GPS unit receives enough satellites to set a waypoint correctly. IMPORTANT: the GPS will not receive INSIDE most buildings. To test that the unit works well: 1- wait until all the LEDs are 2- Send the command #PWD123456#INI#SCT 3- Send the command #PWD123456#GPS? 4- you see that the Green led blinks twice (indicates it received the message) 5- you should see that the Green led blinks once (it sent an answer) 6- you should receive the GPS position by SMS 7- You can input those data into Map point or similar software to see that the position is correct.

©2001 DPS-Promatic srl  (Copyright & privacy)  Last modified:2004/04/03:15:01:35 DPS-Promatic srl - via Edison 21, 47100 Forlì, Italy  P.I. 01519970402 Fax+39-0543-725274 Contact us...

2301