|
|
|
The TCS-GPS, like all other TCS products can be completely programmed
via SMS commands.
The same commands (or at least most of them) can be issued also on line,
if the unit is connected to a PC via the special active cable and
also via Data call.
Important: Data communication with the TCS-GPS must be set at 4800 Baud, No parity, 8 bit, 1 stop bit (N81)
To know more about TCS commands read the
TCS OS command list.
There are some special commands developed expecially for the TCS-GPS or of particular relevance
for this project, and they are:
|
