|
Command:
|
#PIP
|
|
Description:
|
Sets IP parameters for connection in GPRS for TCS-GPS
|
|
Product availability:
|
TCS-GPS=Y
|
|
Command availability:
|
Command line and SMS
|
|
Syntax:
|
|
|
Mandatory fields:
|
<IP> : IP address where the packets must be sent
i.e. 192.165.138.020 (always fill with zeroes if necessary!)
or alphanumeric address like domain.net (max 40 characters)
<dp> : destination port of UDP packets
IMPORTANT: operators don't usually let UDP packets go to all ports.
Depending on the port you use, the system may or may NOT work.
We have seen that port 999 usually works, but this could not be your case
and we can't change this fact. Ask your operator.
|
|
Optional fields:
|
[=] allowed to improve readability
|
|
Examples:
|
#PIP=192.168.135.002,999
|
|
Default value after #INI:
|
000.000.000.000,0
|
|
Default value after reset:
|
Unchanged
|
|
ADMIN Password privileges:
|
Write/read
|
|
USER Password privileges:
|
Read
|
|
Notes:
|
This command is very specific and you must know about GPRS
and Internet to understand it.
|