TCS-CAMII quick reference

****************************************************************************
How to connect the TCS-CAMII to a PC
****************************************************************************
In order to setting TCS-CAMII parameters you may connect a PC to your camera.
It is possible to use "hyperterminal" or our TCS-Commander (included in CD)

the connection parameters are: 4800,n,8,1 in both programs

To enter in TCS-OS press space bar until you see

Hello
>

and now type "menu" (lower case)

You will read the following prompt:

DPS-Promatic TCS-CAM II 0.06 [TCMAX]
Insert password :
#PWD
the default password is "123456"

****************************************************************************
STARTUP
****************************************************************************
1) Format the flash memory with #XCE command
/#XCE
#XCE-OK

2) try to grab an image
/#JPG?
#JPG=0,2420-OK

3) list images in memory
/#LLI?
[000] 05/07/01 20:28:36 03 03 2420
#LLI-OK

4) grab another image...
/#JPG=1
#JPG=1,1228-OK

5) list images in memory
/#LLI?
[000] 05/07/01 20:28:36 03 03 2420
[001] 05/07/01 20:29:03 01 03 1228
#LLI-OK
/

OK your TCS-CAMII works fine

****************************************************************************
How to download an image with TCS-CAMII software with a Data call
****************************************************************************
Hardware requirement
1) PC with windows9x or 2000 or XP
2) A serial PORT (DO NOT USE USB ADAPTORS!)
3) Connect a modem to COM port

Install on your PC the TCS-CAMII software (on the CD) and follow instructions
on the screen to grab image, change format and so on.

****************************************************************************
How to setup a gprs connection
****************************************************************************
The camera will grab an image and send it in GPRS to a server by means of UDP
packets. To do so you need to set the APN and the destination address.
Only for a few trials you can use our UDP receiver, that we keep expecially
for this purpose, even if it is not certain that it will be there and working.
Don't send obscene images and remember that images are erased on daily basis.
The images will be visible on http://tcscam.maxpor.net/public/
Once you know what is the APN needed to access the internet you can program
the camera by entering these commands:


#ATCAT+CGDCONT=1,"IP","apn" (replace apn with your operator's one)
#PIP=tcscam.maxpor.net,998 (this is the public address of our UDP receiver, for test only)
#LGI=10,00,24
#REG02=03
#AMS26=Image uploaded ! Please download at:
#AMS27=http://tcscam.maxpor.net/public/
#MTX29=10000000
#TEL01=3481234567 <- put YOUR GSM number !

with these settings your TCS-CAMII will send an image to our UDP server
and send you a sms with URL of image uploaded.