TCS-CAM II help on line


....Work in progress.....

This page contains most important informations to enable you to use your TCS-CAM II.
  • 1- take a look at the pictures in this page to see how to connect to power and how to insert the SIM
  • 2- if you are familiar with TCS products, read the quick start-up procedure




    •  
    gsm camera picture 1
    The TCS-CAM II comes into a plastic box with a antenna FME connector and a I/O & Power cable.


    Please connect the wires as shown in the picture.
    Connect to the Power input any DC voltage from 12 to 28VDC. Use the Red (+) and Black (-) wires, as shown.


    Remove the PIN code from your SIM (use a telephone to do it and check it does not ask for the PIN when you switch the telephone ON).
    With the unit switched OFF, insert the SIM into the SIM holder and insert it back into its place until it locks.