|
|
|
Weather data can be obtained on any TCS-AWS station in 2 ways: placing a voice call or by SMS.
Weather data by voice call Place a call to the voice number of your station
and you will listen to the voice reading real time values. Sampling interval can be changed
from 2 minutes to 60 minutes using the #LGV command.
Important voice calls are subject to the setup you have entered under command #ACM.
If you have bought the DTMF option, you can enable a touch tone password that people have to
input on their phone to be able to listen to weather data.
Alternatively you can choose to enable a White List of people to whom the station
will answer (won't answer to others).
Useful It is possible to record a 8 seconds message before actual weather data are read out.
this is a good promotional feature.
Weather data by SMS Send an SMS with the command #PWD123456#GTM (where 123456 is the password
that you can change as you like) and in a few second you will receive an SMS
with weather data, that will include all data relevant to your station.
As an example, the following is the SMS that is sent by the TCS-AWS with temperature, humidity, wind and rain sensors:
LAST 10 min
WIND:N (30) SD:1
TEMP:25 (Today:20/30)
DP:19.2 RH:58%
RAIN: 1.2 (24h 2.0 mm)
POW:B (12.5V)
IC=3
TCS-AWS-IT-0152
Notes and explanations:
|
